eLux Recovery procedures
Simplified DHCP configuration
– only for homogeneous environment: Only UEFI devices (or only non-UEFI devices) –
Note:
If you are using eLux RP 6 X64 devices with and without UEFI, you will need DHCP policies to select the relevant boot file. For further information, see DHCP configuration for eLux RP 6 X64 devices.
Next to selecting DHCP options for the router, DNS server and domain name which are already required for eLux, for a PXE recovery installation, you need to define the boot server and boot file as DHCP options.
- Open the DHCP manager as administrator.
- For the relevant DHCP server, select either the Server options, the Scope Options or the Reservations for individual devices, and then click Action > Configure Options… > General.
-
Edit the following DHCP options:
Option Value 066 Boot Server Host Name <IP address of the TFTP server>
(normally same as Scout Server IP address)067 Bootfile Name grub/pxex64.efi for UEFI devices (x64)grub/pxe.i386 for non-UEFI devices - Confirm with OK..
Simplified DHCP configuration
Copied!
Failed!